草草影院ccyy免费看片/国产精品在线观看/精品在线视频一区/美女用震蛋叫爽的视频95视频/欧美在线激情视频/日韩中文字幕网

中文|ENG

NewsNews

location:Home - News - Company News

Technological measures for reducing deformation in processing aluminum parts

2023-01-06(3606)Views

There are many reasons for processing deformation of aluminum parts, which are related to material, part shape, production conditions, etc. There are mainly the following aspects: deformation caused by internal stress of blank, deformation caused by cutting force and cutting heat, and deformation caused by clamping force.
1、 Technological measures to reduce processing deformation
1. Reduce the internal stress of the blank
Natural or artificial aging and vibration treatment can partially eliminate the internal stress of the blank. Pre-processing is also an effective process method. For the rough of fat head and big ears, due to the large margin, the deformation after processing is also large. If the surplus parts of the blank are processed in advance and the allowance of each part is reduced, not only can the processing deformation of the subsequent processes be reduced, but also a part of the internal stress can be released after the pre-processing is placed for a period of time.

2. Improve the cutting ability of the tool
The material and geometric parameters of the tool have an important impact on the cutting force and cutting heat. The correct selection of the tool is crucial to reduce the machining deformation of the part.
1) Reasonable selection of tool geometric parameters.
① Front angle: under the condition of maintaining the strength of the cutting edge, the front angle should be appropriately larger. On the one hand, it can grind the sharp edge, and on the other hand, it can reduce the cutting deformation, make the chip removal smooth, and then reduce the cutting force and cutting temperature. Never use negative rake tools.
② Back angle: The size of the back angle has a direct impact on the wear of the back tool surface and the quality of the machined surface. Cutting thickness is an important condition for selecting back angle. During rough milling, due to the large feed rate, heavy cutting load and large heat generation, the tool heat dissipation condition is required to be good, so the back angle should be smaller. During finishing milling, the cutting edge is required to be sharp to reduce the friction between the back face and the machined surface and reduce the elastic deformation. Therefore, the back angle should be larger.
③ Helical angle: In order to make milling smooth and reduce milling force, the spiral angle should be selected as large as possible.
④ Main deflection angle: properly reducing the main deflection angle can improve the heat dissipation conditions and reduce the average temperature of the processing area.

2) Improve tool structure.
① Reduce the number of milling cutter teeth and increase the chip holding space. Due to the large plasticity of aluminum parts and the large cutting deformation during machining, large chip holding space is required, so the radius of the chip holding groove bottom should be larger and the number of milling cutter teeth should be smaller.
② Finish grinding cutter teeth. The roughness value of the cutting edge of the cutter tooth should be less than Ra=0.4um. Before using a new knife, gently grind the front and back of the knife tooth with a fine oilstone to remove the remaining burrs and slight serrations when grinding the knife tooth. In this way, not only cutting heat can be reduced, but also cutting deformation is relatively small.
③ Strictly control the tool wear standard. After tool wear, the workpiece surface roughness value increases, the cutting temperature increases, and the workpiece deformation increases. Therefore, in addition to selecting the tool material with good wear resistance, the tool wear standard should not be greater than 0.2mm, otherwise it is easy to produce chips. During cutting, the temperature of the workpiece should not exceed 100 ℃ to prevent deformation.

3. Improve the clamping method of workpiece
For thin-walled aluminum parts with poor rigidity, the following clamping methods can be used to reduce deformation:
① For thin-walled bushing parts, if the three-jaw self-centering chuck or spring chuck is used to clamp radially, the workpiece will inevitably deform once it is loosened after processing. At this time, the method of axial end compression with good rigidity should be used. Position with the inner hole of the part, make a threaded mandrel, insert it into the inner hole of the part, press the end face with a cover plate and then back it with a nut. The clamping deformation can be avoided when machining the outer circle, so as to obtain satisfactory machining accuracy.
② When processing thin-walled thin plate workpiece, it is best to select vacuum chuck to obtain evenly distributed clamping force, and then use small cutting amount to process, which can effectively prevent workpiece deformation.
In addition, packing method can also be used. In order to increase the technological rigidity of the thin-walled workpiece, media can be filled in the workpiece to reduce the deformation of the workpiece during clamping and cutting. For example, the molten urea containing 3%~6% potassium nitrate is poured into the workpiece. After processing, the workpiece is immersed in water or alcohol, and the filler can be dissolved and poured out.

4. Reasonably arrange the process
During high-speed cutting, due to large machining allowance and intermittent cutting, the milling process often produces vibration, which affects the machining accuracy and surface roughness. Therefore, the NC high-speed machining process can generally be divided into: rough machining - semi-finish machining - corner cleaning - finish machining and other processes. For parts with high accuracy requirements, it is sometimes necessary to carry out secondary semi-finishing and then finish machining. After rough machining, the parts can be naturally cooled to eliminate the internal stress generated by rough machining and reduce deformation. The allowance left after rough machining shall be greater than the deformation, generally 1~2mm. During finishing, the finished surface of the part shall be kept with uniform machining allowance, generally 0.2~0.5mm, so that the tool is in a stable state during the processing, which can greatly reduce cutting deformation, obtain good surface processing quality and ensure the accuracy of the product.

Latest information

0755-32920268

主站蜘蛛池模板: 超碰2| 国产欧美在线播放 | 亚洲国产精品一区二区成人片 | 欧美成人免费看 | 成人a毛片 | 四虎地址8848精品 | 日日摸夜添夜夜夜添高潮 | 青草综合| 自拍偷自拍亚洲精品被多人伦好爽 | 亚洲精品一区二区成人 | 欧美a图 | 在线成人爽a毛片免费软件 亚洲精品ww久久久久久p站 | 尤物av无码色av无码麻豆 | 精品av熟女一区二区偷窥海滩 | 亚洲乱码av中文一二区软件 | 亚洲夜夜欢a∨一区二区三区 | 色欲香天天综合网站 | 成 人影片 免费观看在线 | 裸体久久女人亚洲精品 | 人妻换人妻aa视频 | 不卡无在线一区二区三区观 | 日本亚洲黄色 | 男女啪啪无遮挡高潮免费 | 色天天天综合色天天 | av无码av在线a∨天堂app | 国产亚洲欧美日韩精品一区二区三区 | 亚洲欧美日韩国产精品 | 青娱国产区在线 | 久久久久久国产精品免费免费 | 麻豆国产一区二区三区 | 四虎永久在线精品国产馆v视影院 | 成人电线在线播放无码 | 精品超清无码视频在线观看 | 色大师高清在线播放免费 | 亚洲第一二三四区 | 亚洲色欲综合一区二区三区 | 野外性史欧美k8播放 | 高潮久久久久久 | 欧美婷婷久久五月精品三区 | 亚洲伦理视频 | 色图15p| 日韩人妻精品一区二区三区视频 | 亚洲国产一二三精品无码 | 色婷婷亚洲六月婷婷中文字幕 | 日韩国产精品一区二区三区 | 国产高清毛片 | 亚洲精品另类 | 欧美极品jizzhd欧美爆 | 亚洲国产五月综合网 | 亚洲成aⅴ人片久青草影院按摩 | 九草在线 | 日本高清视频www | 青青草在线视频网站 | 国产精品久久高潮呻吟粉嫩av | 中文字字幕在线乱码视频 | 成人禁片又硬又粗太爽了 | 精品欧美国产 | 日本一级特黄aa大片 | 在线一级片 | 主站蜘蛛池模板: 蛛词}| 亚洲国产制服丝袜高清在线 | 99久久精品国产波多野结衣 | 国产激情无码视频在线播放性色 | 久久一区三区 | 色婷婷亚洲精品综合影院 | 人妻av无码系列专区移动可看 | 天天天狠天天碰天天爱 | 精品乱人伦一区二区三区 | 亚洲伊人情人综合网站 | 亚洲精品 欧美 | 亚洲人成黄网站69影院 | 国产香蕉在线视频 | 久久国产精品久久久久久电车 | 人妻体内射精一区二区三区 | 凹凸福利视频 | 超碰碰碰 | 国产又粗又黄又爽又硬一区二区 | 久久久久久久久久网 | 国产中老年妇女精品 | 国产在线精品一区二区夜色 | 91精品国产综合久久国产大片 | 人摸人人人澡人人超碰 | 玩弄人妻少妇500系列视频 | 69热视频| 色欲色香天天天综合无码www | 成人性生交大片 | 国产av无码专区国产乱码 | 手机国产丰满乱子伦免费视频 | 久久久亚洲国产天美传媒修理工 | 亚洲黄网在线观看 | 亚洲成a∧人片在线播放调教 | 最新精品香蕉在线 | 国产精品成熟老女人 | 97在线免费视频观看 | 性欧美狂欢俱乐部xxxxx | 亚洲欧美日韩国产成人一区 | 黄色一级片在线看 | 一本加勒比波多野结衣 | 天天操天天射天天色 | 色哟哟亚洲精品一区二区 | 国产无遮挡乱子伦免费精品 | 国产小受呻吟gv视频在线观看 | 老熟女毛茸茸浓毛 | 亚洲在看| 中国女人初尝黑人巨高清视频 | 爱情岛成人www亚洲网站 | 在线亚洲激情 | 国产乱码精品一区二三区蜜臂 | 天堂av中文 | 国产精品无码制服丝袜网站 | 免费无挡无摭十八禁视频 | 啊啊啊快高潮了女超碰 | 国色天香中文字幕在线视频 | 欧美一级特黄aaaaaa大片在线观看 | 无遮挡做爰激吻国产999 | 国产av无码专区亚汌a√ | 国产精品第二页 | 99年国精产品一二二区传媒 | 日本公妇乱淫xxxⅹ 久久国产精品视频 | 主站蜘蛛池模板: 蛛词}| 在线观看91av | 美日韩在线视频一区二区三区 | 国产精品有码无码av在线播放 | 久久成年网 | 911香蕉视频| 日本在线一区二区 | av短片| 97精品免费公开在线视频 | 久久久综合视频 | 成人无码视频在线观看网站 | 亚洲欧美一区二区精品久久久 | 亚洲欧美aaa| 青草伊人网 | 色偷偷成人 | 少妇高潮喷潮久久久影院 | 国产三区视频在线观看 | 国产美女精品视频线免费播放软件 | 亚洲视频2 | 又黄又爽又色两性午夜小说 | 国产卡一卡二卡三卡免费 | 国产成人综合久久精品推下载 | 久久国精品 | 天堂中文av | 精品国产依人香蕉在线精品 | 二区在线视频 | 亚洲精品乱码久久久久久蜜桃图片 | 日本日本乱码伦视频在线观看 | 一级全黄毛片 | 午夜精品久久久久久久久 | 国产成人精品一区二区不卡 | 日日猛噜噜狠狠扒开双腿小说 | 真人做人60分钟啪啪免费看 | 欧美色999| 国产真人无遮挡作爱免费视频 | 窝窝影院午夜看片 | 伊人久久大线影院首页 | 亚洲最大成人网站 | 性xxxx欧美老妇胖老太性多毛 | 国产激情综合在线看 | 91亚洲欧美中文精品按摩 | 九九99热| 成人无码av片在线观看蜜桃 | 一级特黄aaaaaa大片 | 色惰日本视频网站www | 无码人妻av一区二区三区蜜臀 | 在线观看av一区二区 | 国产精品欧美一区乱破 | 一区 亚洲 | 2020国产在线拍揄自揄视频 | 精品综合网| 蜜臀亚洲精品国产aⅴ综合第一 | 手机免费看av网站 | 夜夜爽妓女8888视频免费观看 | 婷婷天天 | 国产亚洲欧洲日韩在线... | 国产高清精品软件丝瓜软件 | 在线观看特色大片免费网站 | 国产aⅴ爽av久久久久成人 | 天天在线看无码av片 | 主站蜘蛛池模板: 蛛词}| 国产一精品久久99无吗一高潮 | 精品无码久久久久国产电影 | 一区二区国产视频 | 欧美肥妇bwbwbwbxx | 国产精品亚洲专区无码唯爱网 | 亚洲成人福利视频 | 伊人网网站 | 成人aaa| 麻豆成人久久精品综合网址 | 青青草国产在线 | 91av免费观看| 精品无码国产污污污免费网站国产 | 亚洲一区欧美精品 | 国产69av | 成人性生交大片免费看r男欢女爱 | 性做久久久久久免费观看欧美 | 天天干天天操天天摸 | 国产美女爽到喷出水来视频 | 少妇丰满尤物大尺度写真 | 午夜精品久久ed2kmp4 | 国产3p露脸普通话对白 | 51被公侵犯玩弄漂亮人妻 | 日本视频三区 | 亚洲精品68久久久一区 | 久久精品卡二卡三卡四卡 | 久热伊人| 中国国产免费毛卡片 | 欧美丰满大黑帍在线播放 | 亚洲人成网站18禁止大 | 日韩在观看线 | 日韩欧美中文字幕视频 | 少妇精品高潮欲妇又嫩中文字幕 | 18禁网站免费无遮挡无码中文 | 久久精品出轨人妻国产 | 毛片网站免费观看 | 色天使在线观看 | 国产成人av三级在线观看按摩 | 又色又爽又黄高潮的免费视频 | jizz国产| 久草国产在线视频 | 边啃奶头边躁狠狠躁玩爽在水里面 | 国产一卡2卡3卡四卡精品 | 美女高潮流白浆视频 | 亚洲欧美色综合影院 | 亚洲精品乱码久久久久久蜜桃 | 人妻无码一区二区三区欧美熟妇 | 精品色区 | 亚洲一区二区三区观看 | 极品国产主播粉嫩在线 | 日韩精品久久久久久久电影蜜臀 | 91在线播放观看 | 国产午夜精品一区二区三区欧美 | 久久天天躁狠狠躁夜夜网站 | 男女啪啪免费网站 | 人妻丰满av无码久久不卡 | 狠狠色噜噜狠狠狠狠蜜桃 | 亚洲伊人色欲综合网无码中文 | 三级av网 | 国产成熟女人性满足视频 | 主站蜘蛛池模板: 蛛词}| 日本在线一区二区三区 | 波多野结衣的av一区二区三区 | 久久久久久亚洲av毛片大全 | 麻豆国产97在线 | 欧美 | 国产精品久久久久久久久岛国 | 国产精品成人无码久久久久久 | 无码丰满人妻熟妇区 | 84pao国产成视频永久免费 | 成人午夜特黄aaaaa片男男 | 动漫3d精品一区二区三区乱码 | 久久九九影院 | 97偷拍少妇性按摩spa全程 | 国语国产精精品国产国语清晰对话 | 久久久999久久久 | 亚洲va久久久噜噜噜久久狠狠 | 国产精品久久无码一区二区三区网 | 欧美成人中文字幕 | 欧美性性享受在线观看 | 日本久久久久久久 | 国产超薄肉色丝袜视频 | 少妇一级淫片高潮性生活 | 免费涩涩18网站入口 | 男男车车的车车网站w98免费 | 伊人久久婷婷色综合98网 | 成人福利视频在线观看 | 午夜国产一区二区三区四区 | 怡红院av亚洲一区二区三区h | 少妇无码av无码专区 | 成人性生交大片免费观看嘿嘿视频 | 男女超碰| 伊人干网综合亚洲 | 日本不卡不卡 | 台湾极品少妇xxx | 欧美黄色片视频 | 国产精欧美一区二区三区久久 | 国产美女无遮挡裸色视频 | 亚洲欧美日韩精品一区二区 | 日本又色又爽又黄的a片吻戏 | 成人影院yy111111 | 免费无码av片在线观看 | 国产猛男猛女52精品视频 | 国产午夜精品一区二区三区软件 | 米奇影院888奇米色99在线 | 丁香伊人网 | 伊人久久大香线蕉综合影院首页 | 一本久道综合色婷婷五月 | 人人澡人人妻人人爽人人蜜桃 | 国产精品久久国产精麻豆99网站 | www.国产麻豆| 成人h动漫精品一区二区原神 | 亚洲日韩国产成网在线观看 | 高h纯肉无码视频在线观看 中文字幕第十五页 | 最近中文字幕在线中文视频 | 国产午夜福利100集发布 | 国产aⅴ精品久久久久久 | 奶头好大狂揉60分钟视频 | 无套内谢孕妇毛片免费看看 | 永久黄网站免费视频性色 | 久久亚洲影视 |